BMW K1200LT
Saddlebag/Trunk/Extension Light
 
The Saddlebag/Trunk/Extension Light contains six ultra-bright
white LEDs and mounts with Velcro in either your saddlebags
or
your trunk. When mounted in a saddlebag, the light turns on and
off via an included pin switch (similar to the type used in
car
doors). The light is supplied with a 15' wire so you could detach
the light and use it anywhere around your bike.
This kit includes:
- LED light assembly with wire, Velcro wrap, and mounting
Velcro attached
- Connectors and adaptors
- Pin switch
- Cable ties
- Detailed instructions
Installation Instructions
There are two versions of the instructions, depending on the date
your kit was built. If you're using the online instructions to
install your kit, match the date on the instructions that came
with your kit (in the document footer) with the date for the online
instructions. If you just want to see the instructions to get an
idea of what's
involved,
you can view either file.
2005-08-06 Installation Instructions here
(PDF format, 500 KB)
2005-12-28 Installation Instructions here (PDF
format, 444 KB)
Optional Vehicle Adapters
Adapters are available from Rider West that let you remove the
saddlebag/trunk light from your bike and plug the light into
either a standard
cigar
lighter/power out jack, or a BMW-type power out jack.
The adapters comes with a Velcro cable wrap and
a set of bullet connectors that you crimp onto the light’s
existing wires. Then the light can be unplugged from the bike,
connected to the adapter, and then plugged into another vehicle.
An adapter
could be handy if your bike’s electrical
system is dead and another vehicle available to plug the light
into, or, if you’re helping
someone in another vehicle away from your bike. For
pricing, availability, and ordering information, contact
|
